SETTING UP YOUR DEVICE
ECO Manual
54
Release Time
This tells your device how long to wait after you release your switch before you can make
another activation with the same key or switch. For example, if you set the Release Time for 1
second, you must wait one second after you release your switch before you can continue to scan
or activate your switch. If you release your switch and then accidentally activate it again before
the release time has passed, your device will not make any activations.
Auto Repeat
This lets you choose how fast a key will repeat when you hold it down.
Predictive Selection
This option works hand-in-hand with Icon Prediction. (Icon Prediction is in the FEEDBACK
MENU and the default is ON.)
When you turn Predictive Selection On, your device highlights only those icons where messages
are stored. These highlighted icons are the only keys on the keyboard that will produce a
response.
Note: Icon Prediction will work whether Predictive Selection is On or not.
Scan Speed
This is the amount of time it takes for your device to move from one key, row, or column to the
next in a scan. The default scanning speed is one second. This means it takes one second from
the time one key is highlighted until the next key is highlighted.
Number of Rescans
Select the amount of times you want to scan the overlay.
Selection Type: Manual/Auto
If you select Manual, you must have a third switch plugged into your device. You will use this
switch to make your final selection.
If you select Auto, your device will automatically select the key you have scanned to after the
Acceptance Time has passed.
Activation Delay
This gives you a few seconds to change your mind when you have selected a key. This is
automatically set to your Scanning Speed. For example, let's say your scanning speed is set to
one second (1.0). You scan to and select a key, then realize it's not the key you want. You have
one second to activate your switch again to "de-select" the key and then scan to a new key.
To Next Page
Loading...