SETTING UP YOUR DEVICE
ECO Manual
55
Scan Auto Restart
When this is On, a new scan will automatically start once you have made a key selection. If it is
Off, you must activate your switch to start a new scan.
Cancel Time
If you are in the middle of a scan, get distracted, and forget to activate your switch to make a
selection, the scan will stop and the highlighting will disappear after the Cancel Time has passed.
If you need a lot of time between switch activations, you can set the Cancel Time to a very long
time before the scan stops.
Modify Scan Pattern
This allows you to make changes to the default scan pattern. You can select the Preview key on
this menu screen and see the scan move as you create it. You may want to use this option for
selected Pages, especially with Context Scenes. See Appendix D beginning on page 282 for
complete information.
Bluetooth Switch
See pages 16 and 18- 25 (1 and 2-switch) in the Bluetooth Switch mini-manual for complete
information. Once you have your access method options selected, set the Bluetooth switch to the
default Switch Mode; plug in an extra switch if you need one; select Bluetooth Switch in the
ACCESS METHOD MENU. Press the PAIR button on the Bluetooth Switch, then select the
Pair with Switch Button on your device screen. You will see a box on your device screen
telling you when the pairing is complete and the device and switch are connected.
To Next Page
Loading...