Edge-Core ES4626F

Basic Management Tasks
4-38
4
Web – Select SNTP, Configuration. Modify any of the required SNTP parameters,
and click Apply. To send an immediate request to the configured servers, click
Update Time.
Figure 4-25 SNTP Configuration
CLI – This example configures the switch to operate as an SNTP client and then
displays the current time and settings.
Console(config)#sntp client 23-36
Console(config)#sntp poll 16 23-37
Console(config)#sntp server 10.1.0.19 137.82.140.80 128.250.36.2 23-37
Console(config)#sntp update-time 23-38
Console(config)#exit
Console#show sntp 23-38
Current time: Jan 6 14:56:05 2004
Poll interval: 60
Current mode: unicast
SNTP status : Enabled
SNTP server 10.1.0.19 137.82.140.80 128.250.36.2
Current server: 128.250.36.2
Console#