LLDP Commands
32-18
32
show lldp info statistics
This command shows statistics based on traffic received through all attached
LLDP-enabled interfaces.
Syntax
show lldp info statistics [detail interface]
• detail - Shows detailed information.
•interface
• ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-26/50)
• port-channel channel-id (Range: 1-32)
Command Mode
Privileged Exec
Example
switch#show lldp info statistics
LLDP Device Statistics
Neighbor Entries List Last Updated : 2450279 seconds
New Neighbor Entries Count : 1
Neighbor Entries Deleted Count : 0
Neighbor Entries Dropped Count : 0
Neighbor Entries Ageout Count : 0
Port | NumFramesRecvd NumFramesSent NumFramesDiscarded
----- + -------------- ------------- ------------------
1 | 0 20 0
2 | 13 13 0
3 | 2 2 0
4 | 0 0 0
5 | 0 0 0
.
.
.
switch#show lldp info statistics detail ethernet 1/1
LLDP Port Statistics Detail
PortName : Eth 1/1
Frames Discarded : 0
Frames Invalid : 0
Frames Received : 12
Frames Sent : 13
TLVs Unrecognized : 0
TLVs Discarded : 0
Neighbor Ageouts : 0
switch#
To Next Page
Loading...
Need help?
General