Edge-Core ES4626F User Manual

Address Table Commands
31-4
31
mac-address-table aging-time
This command sets the aging time for entries in the address table. Use the no form
to restore the default aging time.
Syntax
mac-address-table aging-time seconds
no mac-address-table aging-time
seconds - Aging time. (Range: 10-1000000 seconds; 0 to disable aging)
Default Setting
300 seconds
Command Mode
Global Configuration
Command Usage
The aging time is used to age out dynamically learned forwarding information.
Example
show mac-address-table aging-time
This command shows the aging time for entries in the address table.
Default Setting
None
Command Mode
Privileged Exec
Example
Console(config)#mac-address-table aging-time 100
Console(config)#
Console#show mac-address-table aging-time
Aging time: 300 sec.
Console#

Edge-Core ES4626F Specifications

General

Brand	Edge-Core
Model	ES4626F
Category	Switch
Language	English