Edge-Core ES4626F

xxv
Figures
Figure 3-1 Home Page 3-2
Figure 3-2 Front Panel Indicators 3-3
Figure 4-1 System Information 4-2
Figure 4-2 Switch Information 4-3
Figure 4-3 Displaying Bridge Extension Configuration 4-5
Figure 4-4 IPv4 Interface Configuration - Manual 4-7
Figure 4-5 Default Gateway 4-7
Figure 4-6 IPv4 Interface Configuration - DHCP 4-8
Figure 4-7 IPv6 Interface Configuration 4-14
Figure 4-8 IPv6 General Prefix Configuration 4-16
Figure 4-9 IPv6 Neighbor Detection and Neighbor Cache 4-19
Figure 4-10 Configuring Support for Jumbo Frames 4-21
Figure 4-11 Copy Firmware 4-22
Figure 4-12 Setting the Startup Code 4-23
Figure 4-13 Deleting Files 4-23
Figure 4-14 Downloading Configuration Settings for Start-Up 4-25
Figure 4-15 Setting the Startup Configuration Settings 4-25
Figure 4-16 Configuring the Console Port 4-27
Figure 4-17 Configuring the Telnet Interface 4-29
Figure 4-18 System Logs 4-31
Figure 4-19 Remote Logs 4-32
Figure 4-20 Displaying Logs 4-33
Figure 4-21 Enabling and Configuring SMTP Alerts 4-34
Figure 4-22 Renumbering the Stack 4-36
Figure 4-23 Resetting the System 4-36
Figure 4-24 Current Time 4-37
Figure 4-25 SNTP Configuration 4-38
Figure 4-26 Clock Time Zone 4-39
Figure 4-27 Summer Time 4-41
Figure 5-1 Enabling the SNMP Agent 5-2
Figure 5-2 Configuring SNMP Community Strings 5-3
Figure 5-3 Configuring SNMP Trap Managers 5-6
Figure 5-4 Setting the SNMPv3 Engine ID 5-7
Figure 5-5 Setting an Engine ID 5-8
Figure 5-6 Configuring SNMPv3 Users 5-10
Figure 5-7 Configuring Remote SNMPv3 Users 5-12
Figure 5-8 Configuring SNMPv3 Groups 5-16
Figure 5-9 Configuring SNMPv3 Views 5-17
Figure 6-1 User Accounts 6-2
Figure 6-2 Authentication Server Settings 6-4
Figure 6-3 HTTPS Settings 6-6
Figure 6-4 HTTPS Settings 6-7