Edge-Core ES4626F

Configuring the Routing Information Protocol
20-13
20
CLI - The information displayed by the RIP Statistics screen via the web interface
can be accessed from the CLI using the following commands.
Console#show rip globals 42-16
RIP Process: Enabled
Update Time in Seconds: 30
Number of Route Change: 4
Number of Queries: 0
Console#show ip rip configuration 42-16
Interface SendMode ReceiveMode Poison Authentication
--------------- --------------- ------------- -------------- ------------------
10.1.0.253 rip1Compatible RIPv1Orv2 SplitHorizon noAuthentication
10.1.1.253 rip1Compatible RIPv1Orv2 SplitHorizon noAuthentication
Console#show ip rip status 42-16
Interface RcvBadPackets RcvBadRoutes SendUpdates
--------------- --------------- -------------- ---------------
10.1.0.253 0 0 60
10.1.1.253 0 0 63
Console#show ip rip peer 42-16
Peer UpdateTime Version RcvBadPackets RcvBadRoutes
--------------- ------------ --------- --------------- --------------
10.1.0.254 4610 2 0 0
10.1.1.254 4610 2 0 0
Console#