Interface Commands
27-12
27
Ingress Rule Shows if ingress filtering is enabled or disabled (page 34-9).
Acceptable Fame Type Shows if acceptable VLAN frames include all types or tagged frames only
(page 34-9).
Native VLAN Indicates the default Port VLAN ID (page 34-10).
Priority for Untagged Traffic Indicates the default priority for untagged frames (page 35-3).
GVRP Status Shows if GARP VLAN Registration Protocol is enabled or disabled (page 34-3).
Allowed VLAN Shows the VLANs this interface has joined, where “(u)” indicates untagged and
“(t)” indicates tagged (page 34-11).
Forbidden VLAN Shows the VLANs this interface can not dynamically join via GVRP
(page 34-12).
802.1Q-tunnel Status Shows if 802.1Q tunnel is enabled on this interface (page 34-15).
802.1Q-tunnel Mode Shows the tunnel mode as Normal, 802.1Q Tunnel or 802.1Q Tunnel Uplink
(page 34-15).
802.1Q-tunnel TPID Shows the Tag Protocol Identifier used for learning and switching packets
(page 34-16).
Table 27-2 show interfaces switchport - display description (Continued)
Field Description
To Next Page
Loading...
Need help?
General