Edge-Core ES4626F

IP Interface Commands
41-2
41
IP Version 6
Interface Address Configuration and Utilities
ipv6 enable Enables IPv6 on an interface that has not been configured with an
explicit IPv6 address
IC 41-7
ipv6 general-prefix Defines an IPv6 general prefix for the network address segment GC 41-8
show ipv6
general-prefix
Displays all configured IPv6 general prefixes NE, PE 41-9
ipv6 address Configures an IPv6 global unicast address with an option to use an
IPv6 general prefix, and enables IPv6 on an interface
IC 41-9
ipv6 address
autoconfig
Enables automatic configuration of IPv6 global unicast addresses
on an interface and enables IPv6 on the interface
IC 41-10
ipv6 address eui-64 Configures an IPv6 global unicast address for an interface using an
EUI-64 interface ID in the low order 64 bits, and enables IPv6 on the
interface
IC 41-12
ipv6 address
link-local
Configures an IPv6 link-local address for an interface and enables
IPv6 on the interface
IC 41-13
show ipv6 interface Displays the usability and configured settings for IPv6 interfaces NE, PE 41-14
ipv6 default-gateway Sets an IPv6 default gateway for traffic with no known next hop GC 41-17
show ipv6
default-gateway
Displays the current IPv6 default gateway NE, PE 41-17
ipv6 mtu Sets the size of the maximum transmission unit (MTU) for IPv6
packets sent on an interface
IC 41-18
show ipv6 mtu Displays maximum transmission unit (MTU) information for IPv6
interfaces
NE, PE 41-19
show ipv6 traffic Displays statistics about IPv6 traffic NE, PE 41-19
clear ipv6 traffic Resets IPv6 traffic counters PE 41-25
ping ipv6 Sends ICMP echo request packets to an IPv6 node on the network NE, PE 41-25
Neighbor Discovery
ipv6 neighbor Configures a static entry in the IPv6 neighbor discovery cache GC 41-26
ipv6 nd dad attempts Configures the number of consecutive neighbor solicitation
messages sent on an interface during duplicate address detection
IC 41-27
ipv6 nd ns interval Configures the interval between IPv6 neighbor solicitation
retransmissions on an interface
IC 41-29
show ipv6 neighbors Displays information in the IPv6 neighbor discovery cache NE, PE 41-30
clear ipv6 neighbors Deletes all dynamic entries in the IPv6 neighbor discovery cache PE 41-31
Table 41-2 Basic IP Configuration Commands (Continued)
Command Function Mode Page