Procedure
1.
Press Home > ALT > F1 Version.
2. Review the File Name and File Version columns.
File name Program
XShell.exe Firmware and main menu
Analyze2140.exe Analyze and Advanced Analyze
Balance2140.exe Balance
Route2140.exe Route
Alignment2140.exe Basic or Advanced Laser Alignment
Transient2140.exe Transient
ODSModal2140.exe ODS/Modal
3. Press Enter.
3.5.2 Upgrade the firmware in the analyzer
Note
Updates to the analyzer programs are not included in the firmware upgrade. You must update the
programs separately from the firmware. Call technical support to see if any updates are available.
Prerequisites
Ensure the same connection type is set on the analyzer and in Data Transfer.
Procedure
1.
Copy the new firmware to a folder on your computer.
2. Connect the analyzer to the computer using the USB cable.
3. On the computer, open Data Transfer.
4. In the Options pane, set the Key Table and Firmware fields to the firmware folder
you created in step 1.
a. Click the Options icon.
b. Click Browse next to the Key Table field and select the folder containing the
firmware.
c. Click Browse next to the Firmware field and select the folder containing the
firmware.
d. Click Apply.
5. Turn off the analyzer.
6. Press and hold the Home key and then quickly press the Power key on the analyzer.
The CSI Special Functions Menu appears.
Transfer files with CSI 2140
MHM-97432 Rev 7 65
To Next Page
Loading...
Need help?
General
