Epson WF-C579R Series - Page 179

Set the Computer Name to Display on the Printer's Control Panel
You can set the computer name (alphanumeric) to display on the printer's control panel using Document Capture
Pro.
Note:
Operations may vary depending on the operating system and the soware version. See the soware help for details on using
the features.
1. Start Document Capture Pro.
2. On the menu bar of the main screen, select Option > Network Scanning Settings.
Note:
On windows, Option is only displayed in standard view. If you are in simple view, click Switch to Standard View.
3. On the Network Scanning Settings screen, enter the computer name in Your PC Na me ( alp han ume ri c).
4. Click OK.
Setting Operation Mode
Before scanning, set the operation mode on the control panel to match the computer on which Document Capture
Pro is installed.
1. Select Settings from the home screen.
2. Select General Settings > Scan Settings > Document Capture Pro.
3. Select the operation mode.
❏ Client Mode: Select this if Document Capture Pro is installed on Windows or Mac OS.
❏ Server Mode: Select this if Document Capture Pro is installed on a Windows Server. Next, enter the server
address.
4. If you have changed the operation mode, check that the settings are correct, and then select OK.
Scanning Using the Document Capture Pro Settings
Before scanning, prepare the followings.
❏ Install Document Capture Pro on your computer (server) and create the job.
❏ Connect the printer and the computer (server) to the network.
❏ Set the operation mode on the control panel.
1. Place the originals.
Note:
If you want to scan multiple originals or make 2-sided scans, place all of the originals in the ADF.
2. Select Scan on the home screen.
3. Select Computer.
User's Guide
Scanning
179