Epson WorkForce AL-MX200DNF

3. Click Add Printer.
4. Enter root as the user name, and then enter the administrator password.
5. Click OK.
6. Select either of the following according to the type of your printer connection.
For a network printer:
a
Select LPD/LPR Host or Printer from the Other Network Printers menu, and then click
Continue.
b
Enter the IP address of the printer in Connection.
Format: lpd://xxx.xxx.xxx.xxx (the IP address of the printer)
c
Click Continue.
d
Enter the name of the printer in Name in the Add Printer dialog box, and then click
Continue.
You can optionally specify the location and description of the printer as additional
information.
If you want to share the printer, select the Share This Printer check box.
For a USB printer connected to a computer running the Red Hat Enterprise Linux 6 Desktop
(x86):
a
Select EPSON AL-MX200 X (EPSON AL-MX200 X) from the Local Printers menu, and
then click Continue.
b
Enter the name of the printer in Name in the Add Printer dialog box, and then click
Continue.
You can optionally specify the location and description of the printer as additional
information.
If you want to share the printer, select the Share This Printer check box.
AL-MX200 Series User’s Guide
Printer Connection and Software Installation 106