7. Select Epson from the Make menu, and then click Continue.
8. Select Epson AL-MX200 xxx PS3 vX.Y (en) from the Model menu, and then click Add
Printer.
The setup is complete.
You can optionally specify the default options settings of the printer.
For SUSE Linux Enterprise Desktop 11 (x86)
1. Select Computer — More Applications..., and then select YaST on the Application Browser.
2. Enter the administrator password.
YaST Control Center is activated.
3. Select Hardware on YaST Control Center, and then select Printer.
The Printer Configurations dialog box appears.
4. Select either of the following according to the type of your printer connection.
For a network printer:
a
Click Add.
The Add New Printer Configuration dialog box appears.
b
Click Connection Wizard.
The Connection Wizard dialog box appears.
c
Select Line Printer Daemon (LPD) Protocol from Access Network Printer or
Printserver Box via.
d
Enter the IP address of the printer in IP Address or Host Name:.
e
Select Epson in Select the printer manufacturer:.
AL-MX200 Series User’s Guide
Printer Connection and Software Installation 107
To Next Page
Loading...
