2
Network Type Select Server FTP to use a FTP server.
Select Computer SMB to store scanned documents in a shared folder on your
computer.
3
Host Address (IP Address or
DNS Name)
Enter the name or IP address of the FTP server or your computer.
The following are examples:
❏ For Server FTP:
Server name: myhost.example.com
(myhost: host name, example.com: domain name)
IP address: 192.168.1.100
❏ For Computer SMB:
Server name: myhost
IP address: 192.168.1.100
4
Port Number
Enter the server port number. If you are unsure, you can enter the default value
of 21 for FTP and 139 for SMB.
5
Login Name (if required by
host)
Enter the user account name that has access to the shared folder on your
computer or the FTP server.
6
Login Password
Enter the password for the above login name.
Note:
You cannot use an empty password for the Scan to Computer feature. Ensure
that you have a valid password for the user login account. (See “Confirming the
Login name and the Password” on page 190 for details on how to add a
password for your user login account.)
7
Re-enter Password
Re-enter your password.
8
Name of Shared Directory For Computer SMB only.
Enter the name of the shared folder on your computer where you want to store
scanned documents.
AL-MX200 Series User’s Guide
Scanning 206
To Next Page
Loading...
