This report shows a detailed list of monitored protocols.
❏ Monitor Report
This report shows the details of a fax job. This is printed when the fax was successfully sent.
❏ Transmission Report
This report shows the details of a fax job. This is printed when the fax transmission failed.
❏ Broadcast Report
This report shows all the destinations of a broadcast fax and the transmission result for each
destination.
Note:
The reports and lists are all printed in English.
To print a report or list:
1. Press the System button.
2. Select Report / List, and then press the
button.
3. Select a report or list you want to print, and then press the
button.
The selected report or list is printed.
Note:
You cannot manually print the Monitor Report, Transmission Report, and Broadcast Report with the
above procedure. They will be printed as specified upon completion of a fax job. For details on setting
when to print them, see “Fax Transmit” on page 291 or “Fax Broadcast” on page 292.
AL-MX200 Series User’s Guide
Faxing 263
To Next Page
Loading...
