Epson WorkForce AL-MX200DNF - Page 286

Off
*
You cannot receive a fax by pressing the remote receive code on the external
telephone.
On
You can receive a fax by pressing the remote receive code on the external
telephone.
*
Factory default menu setting
Remote Rcv Tone
Purpose:
To specify the remote receive code in two digits to start the Remote Receive action. As the factory
default menu setting, 00 is specified in advance.
Send Header
Purpose:
To print the information of sender on the header of faxes.
Values:
Off
Does not print the information of sender on the header of faxes.
On
*
Prints the information of sender on the header of faxes.
*
Factory default menu setting
Company Name
Purpose:
To specify the name of sender to be printed on the header of faxes. Up to 30 alphanumeric characters
can be entered.
Your Fax Number
Purpose:
To specify the fax number of the printer to be printed on the header of faxes.
Fax Cover Page
Purpose:
To specify whether to attach a cover page to faxes.
Values:
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad 286