Off
Disables the fault time-out feature.
On
60sec
*
By default, the printer cancels a job in 60 seconds after the job halts
abnormally. You can change the setting within a range from 3 to 300
seconds.
3sec - 300sec
*
Factory default menu setting
Job Time-Out
Purpose:
To specify a time period that the printer waits to receive data from a computer. Any print job will be
cancelled when it times out.
Values:
Off
Disables the job time-out feature.
On
30sec
*
By default, the printer waits to receive data from a computer for 30
seconds. You can change the setting within a range from 5 to 300
seconds.
5sec - 300sec
*
Factory default menu setting
Clock Settings
Purpose:
To specify the date and time, and regional time zone of the printer.
Values:
Set Date
Sets the current date.
Set Time
Sets the current time.
Date Format yy/mm/dd
Sets the date format.
mm/dd/yy
dd/mm/yy
*
Time Format 12H
Sets the time format.
24H
*
Time Zone
Sets the time zone.
*
Factory default menu setting
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad 294
To Next Page
Loading...
