Epson WorkForce AL-MX200DNF

Softer
Makes the scanned image softer than the original.
Softest
*
Factory default menu setting
Auto Exposure
Purpose:
To suppress the background of the original to enhance text on the scanned image.
Values:
Off
Does not suppress the background.
On
*
Suppresses the background of the original to enhance text on the scanned
image.
*
Factory default menu setting
Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
2mm
*
/0.1inch
*
Specify the value in increments of 1 mm/0.1 inch. Which factory default menu
setting displays depends on the value selected for mm / inch under the
System Settings menu. See “mm / inch” on page 296 for more information.
0 - 50mm/0.0 - 2.0inch
*
Factory default menu setting
Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Values:
2mm
*
/0.1inch
*
Specify the value in increments of 1 mm/0.1 inch. Which factory default menu
setting displays depends on the value selected for mm / inch under the
System Settings menu. See “mm / inch” on page 296 for more information.
0 - 50mm/0.0 - 2.0inch
*
Factory default menu setting
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad 314