Epson WorkForce AL-MX200DNF

Error Code What You Can Do
031-556 Press the
button to clear the message. Check if the SMB server encounters any write-protection or disk
problem.
031-557 Press the
button to clear the message. Check the following:
❏ If the file name you specified is not used by other users.
❏ If file or folder that has the same name as the one you specified already exists.
031-558 Press the
button to clear the message. Check if the access setting to the SMB server is correct by
contacting your server administrator.
031-571 Press the
button to clear the message. Check if the network is properly connected.
031-574 Press the
button to clear the message. Check if the domain name of the FTP server is correct.
031-575 Press the
button to clear the message. Check if the host name setting to the FTP server is correct.
031-576 Press the
button to clear the message. Check if the FTP server encounters any write-protection or disk
problem.
031-578 Press the
button to clear the message. Check if the network is properly connected and if login name
(user name) and password for the FTP server are correct.
031-579 Press the
button to clear the message. Check if the working path setting to the FTP server is correct.
031-582 Press the
button to clear the message. Check if the FTP server encounters any write-protection or disk
problem.
031-584 Press the
button to clear the message. Check the following:
❏ If the file name you specified is not used by other users.
❏ If file or folder that has the same name as the one you specified already exists.
❏ If the FTP server encounters any write-protection or disk problem.
031-585 Press the
button to clear the message. Check if the FTP server encounters any delete/write-protection
or disk problem.
031-587
031-588 Press the
button to clear the message. Check if the FTP server encounters any write-protection or disk
problem.
031-589 Press the
button to clear the message. Check if the storage location has free space.
031-594 Press the
button to clear the message. Contact your server administrator to check if the scanned file
has wrong setting while being stored to FTP server. If this does not solve the problem, contact our local
representative office or authorized dealer.
See Also:
“Contacting Epson Support” on page 397
031-598 Press the
button to clear the message. Check if the FTP server encounters any write-protection or disk
problem.
AL-MX200 Series User’s Guide
Troubleshooting 370