Epson WorkForce AL-MX200DNF

Error Code What You Can Do
033-503 Press the
button to clear the message. Retry, and check the report. Delete the unnecessary data stored
in the memory.
033-513
033-517 Press the
button to clear the message. Check if the password of the fax lock is correct.
033-518 Press the
button to clear the message. Check if your region is set correctly.
033-519 Fax service is locked. To continue, press the
button and disable the fax lock.
See Also:
“Limiting Access to Copy, Fax, Scan, and USB Direct Print Operations” on page 323
033-787 Press the
button to clear the message. The job is cancelled.
033-788 Press the
button to clear the message. Remove the received fax, or wait for a while until sending a fax is
completed.
034-700 Press the
button to clear the message. If the error continues to appear after the redial for the specified
number of times, try the following:
❏ Check if the phone line is connected properly.
❏ Check if the destination number is correct.
❏ Set Number of Redial to the largest value.
❏ Set Interval Timer or Redial Delay longer.
See Also:
“Connecting the Telephone Line” on page 221
034-701
034-702
034-703 Press the
button to clear the message. If the error continues to appear after the redial for the specified
number of times, try the following:
❏ Check if the phone line is connected properly.
❏ Check if the destination number is available and correct.
❏ Set Number of Redial to the largest value.
❏ Set Interval Timer or Redial Delay longer.
See Also:
“Connecting the Telephone Line” on page 221
034-704
034-705
034-706
034-707 Press the
button to clear the message. If the error continues to appear after the redial for the specified
number of times, try the following:
❏ Set Number of Redial to the largest value.
❏ Set Interval Timer or Redial Delay longer.
❏ Lower Modem Speed.
AL-MX200 Series User’s Guide
Troubleshooting 371