The IP Address Settings screen appears.
13. Select IP Mode depending on your network scheme.
When IPv4 is selected, configure the following:
a
Select Type.
b
If you have selected Use Manual Address from Type, enter the following items:
❏ IP Address of your printer
❏ Subnet Mask
❏ Gateway Address
When Dual Stack is selected, configure the following:
a
Configure IPv4 Settings.
b
If you have selected the Use Manual Address check box under IPv6 Settings, enter the
following items:
❏ IP Address of your printer
❏ Gateway Address
14. Click Next.
AL-MX200 Series User’s Guide
Printer Connection and Software Installation 59
To Next Page
Loading...
