15. Follow the on-screen instructions until the Check Setup screen appears.
16. Print the System Settings page using the operator panel.
See “Printing the System Settings Page” on page 156.
17. Confirm that “Link Quality” is shown as “Good”, “Acceptable”, or “Low” on the report.
Note:
When “Link Quality” is shown as “No Reception”, check if the wireless network settings are correctly
configured. To reconfigure the wireless network settings, click Return.
18. Confirm there are no errors displayed on the LCD panel, and then click Start Installation.
If you see any errors, click Trouble Shooting Guide and follow the instruction.
19. Check if the printer to be installed is listed in the Select Printer screen, and then click Next.
Note:
If the printer to be installed is not listed in the Select Printer screen, try either of the following steps:
❏ Click Refresh to update the information.
❏ Click Add Printer, and then enter the details of the printer manually.
AL-MX200 Series User’s Guide
Printer Connection and Software Installation 69
To Next Page
Loading...
