Epson WorkForce AL-MX200DNF

a
On the operator panel, press the System button.
b Select Admin Menu, and then press the
button.
c Select Network, and then press the
button.
d Select TCP/IP, and then press the
button.
e Select IPv4, and then press the
button.
f Select IP Address, and then press the
button.
(Default IP address range: 169.254.xxx.yyy)
IP Address
169.254.000.041*
3. Ensure that the IP Address on your computer is assigned by DHCP.
4. Launch your web browser.
5. Enter the IP address of the printer in the address bar, and then press the Enter key.
AL-MX200 Series User’s Guide
Printer Connection and Software Installation 78