270 Eos Family Operations Manual
[Record Only] [Enter] [Enter]- adds the current manual data to the selected cue.
[Record Only] [Cue] [x] [Enter] [Enter] - adds the current manual data to cue “x”.
[Update]
Update is a powerful feature, and also very versatile. Using a combination of [Q Only], [Track],
[Trace], and {Make Absolute}, the number of ways you can update specific information and manual
data is virtually endless. Data can be updated to various record targets either at once, or individually.
Update Dialogue Box
When you press [Update], a dialogue box will open in the CIA. Update styles and modifiers for those
styles will be divided in the Update Dialogue Box.
Note: Default Update Modes are set in Setup>User>Record Defaults. See Record Defaults
(on page159) for more information.
Note: {By Type} is available as a softkey. See Updating ByTypePresets (on page245)for
more information.
Update Styles
{All} - this button will update the target cue and all references stored to that cue (nested and
otherwise).
{Make Absolute} - this button will update the target cue and convert all levels to absolute val-
ues, thereby removing any references.
{Ref Only} - this button will only update the palettes or presets used in the cue, but will not
update the cue itself. If a manual reference was used before using {Ref Only}, the last manual
reference will be updated.
Update Modifiers
{Last Ref} - this button will update using the last reference that was applied.
{Break Nested} - this button will update the target cue and any presets used, but breaks the ref-
erence to any palettes nested in a preset. For example, if cue 1 channel 1 references preset 3,
and preset 3 was built using color palette 5. When updated with this option, preset 3 would
be updated, color palette 5 would not, and the reference to CP5 would be broken in preset 3.
{Reset Update} - this button will clear any commands after the [Update] command to quickly
undo pending changes before [Enter] is pressed.
The dialogue box also provides you with a listing (by record target) of what channels/parameters will
be impacted by the update instruction. If the channel contains a reference in the cue, it is indicated.
To Next Page
Loading...
Need help?
General
