To Next Page

To Previous Page

142 Eos Family Operations Manual

The notifications you can see are:

A red “!” means that the dimmer/ device has errors, such as overtemp, breaker trip, and lamp

out.

Yellow “?” means that the dimmer/ device has a warning message. Warning messages can

include:

Multiple devices’ addresses overlap

Multiple devices or different devices at this address

Patched fixture type mismatch

Patched fixture address mismatch

Offline

Detaching Devices

Pressing {Attach} twice will post the {Detach} command.

<Chan> [X] {Attach} {Attach} or <Address> [X] {Attach} {Attach} will remove the link between that

channel/address and the device at that address.

Clearing the Patch

You can clear the patch entirely by accessing the clear functions from Browser>Clear. The clear

functions window will open in the CIA.

To clear the patch, click {Clear Patch}. A confirmation is required before the patch will be cleared.

Other manuals for ETC Element 2

Questions and Answers:

Need help?

Do you have a question about the ETC Element 2 and is the answer not in the manual?

General