470 Eos Family Operations Manual
Show Archive Path (on page472)
Media ArchivePath (on page472)
Share Show Archive(on page472)
Share Media Archive(on page472)
Latitude (on page472)
Longitude (on page472)
Calibrate Elo Touchscreens (on page472)
Calibrate ETC Touchscreens (on page473)
Monitor Arrangement (on page473)
SoftwareUpdate (on page474)
Device Name
This specifies the name the desk will use to identify itself on the network to other devices. Examples
might be Booth Desk and Tech Table.
24 Hour Format Clock
The time is displayed in a 24-hour format as HH : MM : SS. By default this is disabled. Click to enable.
Time
The time the desk is using. This can be changed manually (direct data-entry) or via SNTP (Simple Net-
work Time Protocol) time service. Please see NetworkSettings (on page475)for more information.
The time defaults to 12 hour format. To use 24 hour format, make sure {24 Hour Clock} is checked.
See 24 Hour Format Clock (above).
Date
The date the desk is using. This can be changed manually (direct data-entry) or via SNTP (Simple Net-
work Time Protocol) time service. Please see TimeService (SNTP) (on page483)for more information.
The time is displayed as MM / DD / YYYY.
Time Zone
The time zone the desk is using. This is an offset from Greenwich Mean Time (GMT). Each setting in
the pull-down list displays the offset, the name of the time zone and a couple of cities in that time
zone.
Language
Allows you to select the display language of Eos. Choices include English, Catalan, Bulgarian, Ger-
man, Spanish, French, Italian, Slovak, Turkish, Japanese, Korean, Russian, Chinese - simplified, and
Chinese - traditional.
Keyboard
Allows you to select the language for the alphanumeric keyboard within Eos. A wide variety of key-
boards are supported.
The keyboard can also be changed in the application when the virtual keyboard is open. Click on the
flag icon to see a language drop-down menu.
To Next Page
Loading...
Need help?
General
