388 Eos Family Operations Manual
list of submasters that use the effect
list of cues that use the effect
Note: Any cues or submasters that have overrides, such as rate, for the effect will display
an *.
[About] Groups
When a group is selected, the following information will be displayed:
group number
the group label (if any)
the channels in the group
The {Ordered} and {Numerical} softkeys can be used to change the display view in About Groups.
[About] Submaster
The following information will be displayed when a submaster is selected:
The submaster number
Label (if any)
Current value
Mode (additive, inhibitive, or effectsub)
Fader (proportional or intensity master)
HTP or LTP
Exclusive
Priority
Timing
Fader Pages
Channels in Submaster
Effects assigned
[About] Macro
[About] Macro display shows a list of cues that will execute a selected macro. To view this display,
you must be in the Macro Editor Display. While in that display, press [About] and then select the
macro by using a mouse or touchscreen.
[About] IFCB Palettes
The following information will be displayed when an intensity, focus, color, or beam palette is selec-
ted:
the number of cues the palette is used in
the number of presets the palette is used in
the number of channels
To Next Page
Loading...
Need help?
General
