To Next Page

To Previous Page

Using Filters 289

1. Press and hold {Filter}. The parameter buttons change to display filter selection.

2. Press the parameter button (for example {Zoom}) for the parameter you want to include in the

record target. That parameter will be highlighted and “Filter On” will appear above the

softkey.

3. Release {Filter}. The buttons return to their normal appearance.

In subsequent record functions, only the filtered parameters will be recorded. You may apply as

many partial filters at once, as you wish. Any unfiltered parameters will not be included in record

actions. In Live, unfiltered parameter data is displayed in its proper color, but a gray “N” (indicating

null data) will appear in the upper right corner of the parameter’s field.

Clearing Filters

Applying filters is a toggle state. To clear any filter, simply repeat the application process described

above. When pressed again, any applied filter will be removed.

To clear all filters at once:

1. Press and hold {Filter}. The parameter buttons change to display filter selection. {Clear Filters}

appears in the upper left corner of the parameter buttons.

2. Press {Clear Filters}. Any applied filters will be removed and the highlights will turn off.

3. Release {Filter}. The buttons return to their normal appearance. All parameters are now avail-

able to record functions.

Storing Data with Record Filters

If a record target is stored with filters in place, the filters allow only associated parameter data to be

recorded in the target. Non-filtered data is not included when you record.

The various record targets are affected by filters in the following ways:

Palettes - Palettes by definition are already filtered. The color and beam filters can be used to

further modify what is stored in the color and beam palettes, however.

Presets - Active filter settings impact what is stored in presets.

Cues - Active filter settings impact what is stored in cues, even when using “record only” com-

mands.

[RecallFrom] - Recall from instructions are not affected by the filters.

ETC Element 2 Operating Manual

Other manuals for ETC Element 2