Advanced Manual Control 307
After an Undo has been performed, a {Redo} button will appear in the command history. You may
press this button followed by [Enter] and the last undo will be “redone” to reinstate the removed
commands
In a multiple user environment, each user is only able to undo the changes that they made. In the
undo command history, the user will only see the commands that they used.
Note: Not all commands can be undone including playback actions and manual attributes
placed on channels or encoder actions.
Command History
Command histories are kept for each editing session, which begins when:
a console logs on to the network
a new show file is loaded
a show file is opened, merged, or imported
Each user builds an individual command history, specific to the commands they have entered.
You can open the command history at any time by pressing [Displays] <More Sk> {Cmd History}.
Note: Commands that do not affect manual input or record targets (loading a cue, run-
ning a cue, or moving a submaster) are not included in the command history.
Pressing [Undo] [Undo] will scroll to the most recent undo-able command in the command history
display. To undo the command, press [Enter].
To Next Page
Loading...
Need help?
General
