Creating and Using Effects 345
{Action} [1] [Enter]
The action will populate the chart and will remain selected. You can also create a range of
actions at once, using the [Thru] button, if desired. Use the page keys to navigate to the dif-
ferent columns
After arrowing to the “Time” column (or using the softkeys), specify the fade in time for the
actions.
[5] [Enter]
Page arrow to the Dwell column and enter a dwell time:
[5] [Enter]
Page arrow to the Level column and enter the desired referenced target:
[Color Palette] [5]
Page arrow down and a new action will be created. All fields default to the values in the pre-
vious action. Page to the next action in the Level column and enter the referenced target:
{Color Palette8}
Page arrow down to the next action in the Level column and enter the referenced target:
[Color Palette] [2]
Page arrow down to the next action in the Level column and enter the referenced target:
{Color Palette4}
Adjust any of the effect details on the right side of the CIA by pressing the appropriate detail
button and making changes (see Effects Editor (on page333)).
Range for Level
You can apply a range of levels to the actions. You can either apply a range using the percentage or
by using a palette.
For Example:
Using the above example, select actions 1 through 6.
{Actions} [1] [Thru] [6] [Enter]
Page arrow to the level column and enter the range:
[1][0] [Thru] [1][0][0] - assigns the range starting at 10 and ending at 100 to actions 1
through 6. The range between 10 and 100 will be evenly divided between the avail-
able actions.
-or-
To Next Page
Loading...
Need help?
General
