ETC Element 2 Operating Manual

600 Eos Family Operations Manual
/eos/key/ Internal Eos Command
ref_only REFERENCES_ONLY
relay RELAY
relay_output RELAY_OUTPUT
release RELEASE_FADER
rem_dim REM_DIM
remfiltercat REM_FILTER_CAT
remfilterparam REM_FILTER_PARAM
remove_favorite PATCH_REMOVE_FAVORITE
reorder REORDER
repeat FAN_REPEAT
repeat_last_command REPEAT_LAST_COMMAND
repeat_on_go EFFECT_REPEAT
replace REPLACE_ADDRESS
replace_with REPLACE_WITH
request_file REQUESTFILE
reset_all_tabs RESET_ALL_TABS
reset_columns RESET_COLUMNS
reset_desk_settings RESET_DESK_SETTINGS
reset_show_settings RESET_SHOW_SETTINGS
reset_system RESET_SYSTEM
reset_update UPDATE_CLEAR
restart_effect REFIRE_EFFECT
restore RESTORE_MODE
resume RESUME
resyncframes RESYNC_FRAMES
reverse REVERSE
reverse_steps REVERSE_STEPS
rfr RFR_ENABLE
rgb COLOR_FADE_RGB
rotate_90 PIXELMAP_ROTATE_90
rpu_1 RPU_1
rpu_10 RPU_10
rpu_11 RPU_11
rpu_12 RPU_12
rpu_13 RPU_13
rpu_14 RPU_14
rpu_15 RPU_15
rpu_16 RPU_16
rpu_17 RPU_17
rpu_18 RPU_18

ETC Element 2 Specifications

General

DMX Outputs	2
Touchscreen	Yes
Networking	Ethernet
Type	Lighting Control Console
Master Faders	2
Encoders	4
Ethernet Ports	2
USB Ports	4
Video Output	DisplayPort
Power Input	100-240VAC, 50/60Hz
Power Supply	Internal
Control Channels	6144
Output	Art-Net
Display	Multi-Touch LCD
Storage	Solid State Drive (SSD)