Fagor 8070 BL - Page 144

Programming manual.
CNC 8070
8.
PATH CONTROL.
Linear interpolation (G01).
·144·
(REF: 1709)
Programming example (T model).
Programming in diameters.
Absolute coordinates.
G90 G95 G96 F0.15 S180 T2 D1 M4 M41
G0 X100 Z100
G1 X0 Z80 ; Point A
G1 X30 Z65 ; A-B section
Z55 ; B-C section
X80 Z30 ; C-D section
Z0 ; D-E section
G0 X100 Z100
M30
Incremental coordinates.
G90 G95 G96 F0.15 S180 T2 D1 M4 M41
G0 X100 Z100
G1 X0 Z80 ; Point A
G1 G91 X30 Z-15 ; A-B section
Z-10 ; B-C section
X50 Z-25 ; C-D section
Z-30 ; D-E section
G0 G90 X100 Z100
M30