Fagor 8070 BL - Synchronization of Coordinates and Additive Manual Offset (#SYNC POS)

Programming manual.
CNC 8070
9.
TOOL PATH CONTROL. MANUAL INTERVENTION.
Jogging feedrate.
·176·
(REF: 1709)
9.3.5 Synchronization of coordinates and additive manual offset (#SYNC
POS).
This instruction synchronizes the preparation coordinate with the execution one and
assumes the additive manual offset.
Programming.
Program the instruction #SYNC POS alone in the block.
Programming format.
The programming format is the following; the arguments appear between curly brackets and
the optional ones between angle brackets.
#SYNC POS
#SYNC POS