Programming manual.
CNC 8070
10.
ELECTRONIC THREADING AND RIGID TAPPING.
Electronic threading with constant pitch (G33)
·184·
(REF: 1709)
Electronic taper threading
To make a taper thread in a single pass, 2 mm deep and with a 5 mm pitch.
Thread blending (joining)
We would like to a blend a longitudinal thread with a taper thread with a depth of 2mm and
a pitch of 5 mm.
S100 M03
G00 G90 X200 Z190
X84
G33 X140 Z50 K5
G00 X200
Z190
S100 M03
G00 G90 G05 X220 Z230
X96
G33 Z120 X96 K5
G33 Z60 X160 K5
G00 X220
Z230
To Next Page
Loading...
