Fagor CNC8 070 - Page 100

CNC8070
R
EF
. 0402
OF 128
E
RROR SOLUTIONS
Page 94 of 128
Errors 4000-4999
Wrong value 1
PDU code received with an error (must be 5).
Wrong value 2
Sercos drive error code:
30 Error when changing to Phase 3.
31 Phase 4 command error.
32 Error when changing to Phase 4.
33 Error when reading Class Diagnostics 1.
34 Default error.
35 Error when reading Tncyc.
36 Error when reading OpMode.
37 Error when reading AxisType.
38 Error when reading G00Feed.
39 Error when reading Monit Window.
40 Error when reading SP100.
41 Error when reading KV.
42 Error when reading Checksum.
43 Error when reading DV33.
44 Error when writing DV33.
0 SERC_NO_ERROR
0x8001 ERROR_HSTIMEOUT
0x8002 ERROR_SCHSTIMEOUT
0x8004 SERC_ERROR_TIMEOUT
0x4000 ERROR_CALCULATE_T1
0x4001 ERROR_CALCULATE_T2
0x4002 ERROR_CALCULATE_T3
0x4004 ERROR_CALCULATE_T4
0x4008 ERROR_CALCULATE_TEND
0x2001 ERROR_WRONGPHASE
0x2002 ERROR_WRONGADDRESS
0x2004 ERROR_WRONGATNUMBER
0x2008 ERROR_SCTRANSNOTREADY
0x1002 ERROR_DPRAMOVERFLOW
0x1004 ERROR_SCNOTINIT
0x1008 ERROR_WRONGCHANNELNUMBER
0x0801 ERROR_SCTRANSNODATA
0x0802 ERROR_SCNODATA
0x0803 NOT_READY_FOR_SCDATA
0x0400 ERROR_SCTRANS
0x0201 ERROR_ATMISS
0x0202 ERROR_NERR
0x0203 ERROR_MSTMISS
0x0204 ERROR_DISTORSION
0x0205 ERROR_FIBRA_ROTA
0x0101 NOT_READY
0x0102 BUSYTIMEOUT
0x0080 ERROR_DEFAULT
0x0040 READY_FOR_SCDATA