CNC8070
R
EF
. 0402
OF 128
E
RROR
SOLUTIONS
Page 30 of 128
Errors 1000-1999
1225 'Division by zero'
DETECTION During execution.
CAUSE An operation has been programmed whose execution involves dividing by zero.
SOLUTION It is only possible to divide by numbers other than zero. When working with
parameters, in the program history, that parameter may have taken the value of zero.
Verify that the parameter does not reach the operation with that value (0).
1226 'Face axis (FACEAXIS) missing in the active plane for radius compensation'
DETECTION During execution.
CAUSE One of the axes of the active plane must be defined in the machine parameters as
FACEAXIS type.
SOLUTION In the machine parameters, define one of the axes as FACEAXIS.
1227 'Longitudinal axis (LONGAXIS) missing in the active plane for radius
compensation'
DETECTION During execution.
CAUSE One of the axes of the active plane must be defined in the machine parameters as
LONGAXIS type.
SOLUTION In the machine parameters, define one of the axes as LONGAXIS.
1233 'The programmed zero offset exceeds the data range'
DETECTION During execution.
CAUSE A zero offset has been programmed with a value greater than the maximum
established.
SOLUTION Check the program.
1236 'Macro name too long'
DETECTION During execution.
CAUSE The number of characters of the name of the macro exceeds the maximum allowed.
SOLUTION The maximum is 30 characters.
1237 ''"\" expected in the text associated with the macro'
DETECTION During execution.
CAUSE In the replacement text of the macro, a text has been written between quotes without
being preceded by the "\" character.
SOLUTION The quotes must be preceded by the "\" character within the replacement text of the
macro. A clear case of joining macros is "macro" = " \"macro1\" \"macro2\" ".
1238 'Replacement text of the macro too long'
DETECTION During execution.
CAUSE The number of characters of the replacement text of the macro exceeds the maximum
allowed.
SOLUTION The maximum is 140 characters.
1239 'Too many macros'
DETECTION During execution.
CAUSE The maximum number of macros that may be defined in a program has been
exceeded.
SOLUTION The maximum is 50 macros.
1240 'Nonexistent axis'
DETECTION During execution.
CAUSE An attempt has been made to use a macro that has not been defined previously.
SOLUTION Define the macro as "macro" = "replacement text".
Check the syntax of the macros in the programming manual.
1241 'The replacement text of the macro is missing'
DETECTION During execution.
CAUSE It informs that the macro has been assigned an empty string of characters.
SOLUTION Associate the proper replacement text with the macro according to the functionality
it should have. The replacement text must be written between quotes in the definition
of the macro.
To Next Page
Loading...
