CNC8070
R
EF
. 0402
OF 128
E
RROR
SOLUTIONS
Page 122 of 128
Tool and tool
magazine table
‘Error when renaming the tool’
DETECTION When trying to change the tool name.
CAUSE It cannot create the tool in the database (bd8070.mdb). The data base may be being
used by another application or it may not have write permission.
SOLUTION The data base must have write permission. If the tool data base is being used by
another application, wait for it to be released (freed).
‘A tool that is in the spindle, in the magazine or in the changer arms cannot be
renamed’
DETECTION When trying to change the tool name.
CAUSE An attempt has been made to change the name of a tool but there is already another
tool with that name in the spindle, magazine or changer arms (if any).
SOLUTION Choose another number or unload a tool to ground.
‘A tool cannot be placed in the spindle if there is one in changer arm 2’
DETECTION When forcing a tool as spindle tool.
CAUSE There is a tool in changer arm 2.
SOLUTION Remove the tool from changer arm 2.
‘The tool of the changer arm cannot be placed in the spindle’
DETECTION When forcing a tool as spindle tool.
CAUSE The tool is in changer arm 1.
SOLUTION Remove the tool from changer arm 1.
‘The position does not exist’
DETECTION When loading or unloading a tool from the magazine with or without maneuver.
CAUSE The magazine position does not exist.
SOLUTION Choose an existing magazine position or create it (machine parameter).
‘Path %1 not found’
DETECTION When loading, saving or printing the tool table or magazine table.
CAUSE The selected path does not exist.
SOLUTION Define the path properly or create it.
‘File %1 not found’
DETECTION When loading the tool table or magazine table.
CAUSE The data file does not exist.
SOLUTION Choose existing files and indicate its path correctly.
‘Error when saving the data in %1’
DETECTION When saving the tool table or magazine table.
CAUSE The data file could not be created, already exists and has no write permission, is being
used by another application or there is no room on the disk.
SOLUTION Choose another directory to save the tables, give them write permission, close the
application that is using it or free disk memory space.
To Next Page
Loading...
