Get Connected
TIMS MVP™ Setup and Configuration Guide 3
Configure TIMS MVP™ System with TIMS MVP™ software.
• Set Worklist server AE title, IP address and port number.
• Configure TIMS MVP™ Send/PACS
• Configure a Worklist server.
Create a TIMS MVP™ channel.
• Set CHP.
• Set trigger mode.
• Set monochrome or color.
• Set compression mode.
• Save channel.
Test configuration.
• Create a test study.
• Query site Worklist for patient information.
• Capture images using the trigger.
• Send images to PACS.
• Review images on PACS. Make adjustments, if needed.
• Delete test studies.
• Verify touchscreen calibration. (site option)
• Verify image and Auto-SYNC adjustments.
Install and configure TIMS Review workstations. (site option)
• Review studies or images on TIMS Review workstation
Save and backup TIMS MVP™ configuration.
• Email system configuration zip file to support@tims.com.
To Next Page
Loading...