Other functions 5 Operation
DMS Go+ Edition 4 (05/2014) 5-49
Calibration block data for the sound velocity
– In the function group MEASURE, select the function
VEL REF. BLOCK.
– Press one of the left or right arrow keys. A form win-
dow appears.
– Press one of the left or right arrow keys in order to
set the value for the parameter Unit.
– Press one of the up or down arrow keys in order to
switch to the next parameter.
– Set the other parameters in the same way.
– Finally, press the function key 2 (function DONE) in
order to save the data. The form window disappears,
and the serial number setting is displayed at the func
-
tion VEL REF. BLOCK.
To Next Page
Loading...
