GE DMS Go+ - Choosing the Probe Type

Preparing for measurements 5 Operation
DMS Go+ Edition 4 (05/2014) 5-21
Choosing the probe type
After connecting a suitable probe for the task, you have
to choose the probe type to adjust the DMS
Go+ to the
probe.
The choice of measurement modes as well as individual
functions and parameters available likewise depends on
the selected probe type. The composition of the individ
-
ual function groups varies accordingly.
You have a choice between the following probes:
Note
When a dialog probe (probe designation
DA4... or ...-D) is connected, the DMS
Go+
receives the necessary data from the probe
automatically. In that case, you don't have to
choose the probe type any more. It is auto
-
matically entered after connecting the probe.
– In the function group PROBE&CAL, select the func-
tion PROBE.
– Choose the connected probe. The instrument is im-
mediately adjusted.
● A2 DFR ● CA211A ● OSS10
● D790 ● DA301 ● DA303
● DA312 ● DA312B16 ● DA501
● DA503 ● DA507 ● DA512
● DA590 ● DIALOG ● DP104
● FH2E ● HT400A ● KBA525
● KBA560 ● TC560