6 Data Recorder Evaluations
6-36 Edition 4 (05/2014) DMS Go+
6.7 Evaluations
Viewing statistical evaluations
Taking the stored data as a basis, the DMS Go+ makes
different statistical evaluations available for each file
that you can view in an overview.
The following data are available:
● Number of readings saved
● Number of measuring points without a reading
● Number of obstructed measuring points (OBSTR.)
● Minimum reading saved
● Number of minimum readings saved
● Number of readings saved below a MIN value
● Maximum reading saved
● Number of maximum readings saved
● Number of readings saved above a MAX value
● Number of readings with an additional A-scan
● Number of readings with an additional B-scan
● Number of readings with an additional Microgrid
● Difference between the stored maximum and the
minimum reading
● Statistical mean value of the stored readings
● Statistical standard deviation of the stored readings
To Next Page
Loading...
