GE DMS Go+ - Connectors; Pulser

11 Specifications Specifications of the DMS Go+
11-4 Edition 4 (05/2014) DMS Go+
Connectors
Probe connectors 2 × LEMO-00, mechanical reverse polarity protection
USB interface Micro USB connector
Service interface 1 × Mini-RS232C, only used for service purposes
Pulser
Pulser mode Square-wave pulser
Pulser voltage automatically matched to the probe (120 V or 250 V)
Pulser falling/rising time max. 10 ns
Pulser width automatically matched to the probe