GE DMS Go+ - Date Format, Date, and Time

Default settings 5 Operation
DMS Go+ Edition 4 (05/2014) 5-5
Date format, Date, and Time
You can set the date format, the date, and the time us-
ing the corresponding functions of the function group
CONFIG on the second operating level.
ATTENTION
In view of a correct documentation, always
make sure that you are using the correct date
and the correct time. Remember to turn the
clock during the change from winter time to
summer time.
– In the function group CONFIG, select the function DT
FMT.
– Choose the required date format. The time format is
changed together with the date format.
– Select the function DATE TIME.
– Press the left or right arrow keys.
– Use the navigation to change the highlighted value
and switch over to the next value.
– Change the other values in the same way.
– Finally, press the function key 1 to exit the function.
The new values apply immediately.