GE DMS Go+ - Enabling Options (Upgrade)

5 Operation Enabling options (Upgrade)
5-54 Edition 4 (05/2014) DMS Go+
5.16 Enabling options (Upgrade)
The DMS Go+ is equipped with various options, e.g. for
the measurement method TopCOAT. You can enable
these options by entering the corresponding codes.
Note
To order options, you need the serial number
of your instrument (please see function
ABOUT in the function group CONFIG).
– In the function group CONFIG, select the function
CODE.
– Press one of the up or down arrow keys and enter
the first character of the code.
– Press the left arrow key in order to select the next
character of the code, and enter the other characters
of the code.
– Finally, press the function key 2 (function CON-
FIRM).
If the code you have just entered is correct, the option is
enabled and is immediately available.
– Select the function ABOUT.
– Press one of the left or right arrow keys in order to
display the start display including the information
about the options available.