5 Operation Default settings
5-6 Edition 4 (05/2014) DMS Go+
Selecting the instrument orientation
You can configure the instrument for right-handed or
left-handed operation (referred to the probe). The
screen display is then rotated through 180°, the func
-
tions of navigation and function keys are adjusted ac-
cordingly.
– In the function group CONFIG, select the function
ORIENTATION.
– Choose the required orientation. The screen display
is immediately switched over.
Display orientation
You can change the screen display of DMS Go+ from
landscape to portrait mode.
It is not possible to access the settings and parameters
in the portrait mode.
– Briefly press the center key of the keypad in order to
rotate the screen display by 90 degrees.
– Press the center key one more time in order to see
the original display mode again.
To Next Page
Loading...
