1 Introduction The DMS Go+
1-12 Edition 4 (05/2014) DMS Go+
1.4 The DMS Go+
Overview of functions
The DMS Go+ is a portable thickness gauge with an in-
tegrated data recorder You can use this instrument for
measuring the wall thickness on a large variety of com
-
ponents, for example on tubes, pressure vessels, and
other equipment parts whose wall thickness is subject to
a gradual reduction.
This makes the DMS Go+ especially suitable for mea-
surement tasks for the documented corrosion test.
Special features of the DMS Go+
● high measuring stability and reliability thanks to the
zero crossing method
● automatic gain control for an improved reproducibility
during corrosion tests
● dust-tight and waterproof housing according to IP67
● low weight (845 g incl. batteries)
● long operating time (8 hours) due to lithium-ion bat-
tery with internal and external charging possibility
● one-handed operation is possible
● high-resolution color screen (800 x 480 pixels) for the
display of measured values and A-scan
● enlarged display of measured values which are easy
to read even from a greater distance
● color-coded display of gates for easy differentiation
To Next Page
Loading...
Need help?
General
