Harmonic ProView 2900 - Stand-Alone Select; Preferred Language

Chapter 8: Service Configuration Menu Preferred Language
© Harmonic Inc. Manual p/n 101543/Ver 1.0 8-6 ProView 2900 Series/SW Version 1.94
8.3. Stand-Alone Select
This feature will be supported in the future software releases.
8.4. Preferred Language
The Preferred Language Edit menu screen lists the audio channels available for the received
services.
To access the Preferred Language edit menu in the front panel control interface go to
Configuration 

 Service 

 Preferred Language.
Preferred Language
Preferred Language Preferred Language
Preferred Language 1
11
1-
--
-2
22
2-
--
-3
33
3-
--
-4
4 4
4
1 Audio 1
1 Audio 11 Audio 1
1 Audio 1 ALL LANGUAGES
ALL LANGUAGESALL LANGUAGES
ALL LANGUAGES
2 Audio 2
2 Audio 22 Audio 2
2 Audio 2 English Old
English OldEnglish Old
English Old-
--
-ang
angang
ang
3
33
3 V
V V
VB
BB
Bi 1
i 1i 1
i 1 1073
10731073
1073
4
44
4 Subtitling 1
Subtitling 1 Subtitling 1
Subtitling 1 1073
10731073
1073
NOTE
The number of audio channels provided in the Preferred Languages Menu is dynamic and
is determined by the ProView 2900 model. Audio 3 and Audio 4 channels are available in dual
decoders, ProView 2980, and ProView 2981 models only.
Figure 8-4 displays the corresponding Preferred Language menu in the Web Management
screen (Service 

 Preferred Language).
Figure 8-4: Preferred Language Screen
The operator can assign a preferred language to each of the Audio channels, as well as to
the available VBIs and Subtitling.