Harmonic ProView 2900 - Monitor Output; Broadcast Output; Position Offset; Y Position Offset

Chapter 9: Video Configuration Menu OSD 1 (and OSD 2) Configuration Options
© Harmonic Inc. Manual p/n 101543/Ver 1.0 9-17 ProView 2900 Series/SW Version 1.94
9.4.1. Monitor Output
Selecting Monitor Output displays the following screen:
Monitor Output
Monitor Output Monitor Output
Monitor Output
1
11
1

 DISABLE
DISABLE DISABLE
DISABLE
2
22
2

 ENABLE
ENABLE ENABLE
ENABLE
The available options are:
• DISABLE – Disables Monitor Output (ProView 2900 rear panel)
• ENABLE – Enables Monitor Output
9.4.2. Broadcast Output
Selecting Broadcast Output displays the following screen:
Broadcast Output
Broadcast Output Broadcast Output
Broadcast Output
1
11
1

 DISABLE
DISABLE DISABLE
DISABLE
2
22
2

 ENABLE
ENABLE ENABLE
ENABLE
The available options are:
• DISABLE – Disables Broadcast Output (ProView 2900 rear panel)
• ENABLE – Enables Broadcast Output
9.4.3. X Position Offset
Selecting X Position Offset displays the following screen:
X Position Offset
X Position Offset X Position Offset
X Position Offset
+000 [Pixel]
+000 [Pixel]+000 [Pixel]
+000 [Pixel]
<
<<
<-
--
-300
300 300
300 -
--
- +300>
+300> +300>
+300>
This function determines the horizontal offset of the OSD signal.
The valid range of values is between (-300) and (+300) pixels
9.4.4. Y Position Offset
Selecting Y Position Offset displays the following screen:
Y Position Offset
Y Position Offset Y Position Offset
Y Position Offset
+000 [Pixel]
+000 [Pixel]+000 [Pixel]
+000 [Pixel]
<
<<
<-
--
-300
300 300
300 -
--
- +300>
+300> +300>
+300>
This function determines the vertical offset of the OSD signal.
The valid range of values is between (-300) and (+300) pixels.