Harmonic ProView 2900 - Front Panel Initialization Sequence

Chapter 4: ProView 2900 Control Interfaces Front Panel Control Interface
© Harmonic Inc. Manual p/n 101543/Ver 1.0 4-6 ProView 2900 Series/SW Version 1.94
4.1.3. Front Panel Initialization Sequence
To activate the ProView 2900 Front Panel Root Menu perform the following:
1. Power up the ProView 2900. The ProView 2900 initialization phase begins and
the initialization message is displayed.
MPEG
MPEG MPEG
MPEG-
--
-2 I.R.
2 I.R.2 I.R.
2 I.R. Service1:
Service1:Service1:
Service1:
Initializing
InitializingInitializing
Initializing
Please Wait...
Please Wait...Please Wait...
Please Wait...
2. When initialization complete, the ProView 2900 displays one of two options:
• Status OK – Both LEDs are lit green.
Status OK
Status OKStatus OK
Status OK Service1: TV
Service1: TVService1: TV
Service1: TV
Click Enter f
Click Enter fClick Enter f
Click Enter for menu
or menu or menu
or menu TRT INT
TRT INTTRT INT
TRT INT
NOTE
Blank Service1 and/or Service2 fields at the front panel root screen, means service not
chosen. In order to select services see section 8.2
• Front-End Warning – The warning LED turns orange (For details see
Appendix E).
___________________________________________
______________________________________________________________________________________
___________________________________________
Service1:
Service1:Service1:
Service1:
Click Enter for menu
Click Enter for menu Click Enter for menu
Click Enter for menu
__________________________________________
____________________________________________________________________________________
___________________________________________
__
_
3. Click [Enter] to activate and enter the ProView 2900 Root Menu (see details in
Chapter 5):
Root
Root Root
Root 1
1 1
1
1 Preset
1 Preset1 Preset
1 Preset
2 Configuration
2 Configuration2 Configuration
2 Configuration
3 Status
3 Status3 Status
3 Status
The Root Menu provides the following main branch options:
• ProView 2900 Preset Menu – See Section 5.2 for details.
• ProView 2900 Configuration Menu – See Section 5.3 for details.
• ProView 2900 Status Menu – See Section 5.4 for details.