© Harmonic Inc. Manual p/n 101543/Ver 1.0 A-1 ProView 2900 Series/SW Version 1.94
Appendix A
Downloading ProView 2900 Software
This appendix provides directives for downloading the ProView software using FTP and
A.1 Downloading ProView 2900 Software Using FTP
NOTES
There are many PC Software Applications that support FTP.
In this document, software download procedure is performed using the built-in MS Windows
FTP utility.
Configure the ProView 2900 IP Management Port according to local network specifications.
The ProView 2900 IP Management is configured from the front-panel by accessing
Configuration
Unit
Ethernet Management Port.
Set the following parameters: IP Address, Network Mask, and Gateway.
Viewing the ProView 2900 version is available through the front-panel by selecting
Status
Unit
Versions
Main Application.
A.1.1 Open an FTP Session
To open an FTP session, perform the following:
1. Click Start. The Start Menu is displayed.
From the Start Menu click Run. The Run dialog box is displayed.
Figure A-1: Start Menu – Select Run
3. Type “cmd” in the combo-box and click OK. The terminal window is displayed.
To Next Page
Loading...
